incoloy 25 6mo n08926 heat acid resistant plate

incoloy 25 6mo n08926 heat acid resistant plate

1.4529,25-6Mo,UNS N08926

This is one of four similar specifications for 6%Mo superaustenitics X NiCrMoCuN 25 20 6 (1.4529), UNS NO8367, UNS NO8925 and UNS NO8926. Each has controlled compositions with nominally 21%Cr 25%Ni 6.5%Mo 0.2%N with some variations (notably Cu and N) between specifications.

Alloy SSC-6MO - Superaustenitic Stainless Steel

The resistance of SSC-6MO to dilute (less than 15%) sulfuric acid at all temperatures up to the boiling point and to concentrated (greater than 85%) solutions at low temperatures is good for an austenitic stainless steel. In pure sulfuric acid, SSC-6MO performs significantly better than 316L and somewhat better than 904L. China Corrosion Resistant Incoloy 925 Incoloy 926 Nickel There are many types of Incoloy alloys:common such as Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 840, Incoloy 901, Incoloy 925, Incoloy 20, Incoloy330, Incoloy 25-6Mo. Incoloy 925 has good mechanical strength and extensive corrosion resistance. Commonly used in oil and gas drilling equipment on the parts manufacturing.

China Corrosion Resistant Incoloy 925 Incoloy 926 Nickel

There are many types of Incoloy alloys:common such as Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 825, Incoloy 840, Incoloy 901, Incoloy 925, Incoloy 20, Incoloy330, Incoloy 25-6Mo. Incoloy 925 has good mechanical strength and extensive corrosion resistance. Commonly used in oil and gas drilling equipment on the parts manufacturing. Elgiloy Specialty Metals Wire ProductsINCOLOY® 25-6MO alloy UNS N08926 W. Nr 1.4529 Applicable Specifications Wire & Bar ASTM B649 Description:INCOLOY® 25-6MO alloy is an iron-base super-austenitic stainless steel with resistance to a wide range of corrosive environments.

F44/S31254/1.4547/6% Molybdenum Super Austenitic

The high molybdenum content and nitrogen provide resistance to pitting and crevice corrosion, while copper enhances resistance to sulphuric acid. Alloy 254SMO / 6Mo / F44 is a fully austenitic alloy containing 6% molybdenum and offering excellent corrosion resistance in a wide variety of aggressive, aqueous environments. F44/S31254/1.4547/6% Molybdenum Super Austenitic The high molybdenum content and nitrogen provide resistance to pitting and crevice corrosion, while copper enhances resistance to sulphuric acid. Alloy 254SMO / 6Mo / F44 is a fully austenitic alloy containing 6% molybdenum and offering excellent corrosion resistance in a wide variety of aggressive, aqueous environments.

GENERAL TECHNICAL INFO Type (6Moly, INCOLOY®

Alloy 926 Mo (INCOLOY® alloy 25-6MO, UNS N08926 / W. Nr. 1.4529) is a super-austenitic 6% molybdenum stainless steel that provides excellent resistance to a variety of highly corrosive environments. This alloy performs well in high chloride process streams where pitting, crevice corrosion and stress corrosion cracking may occur. High- Performance Stainless Steels - Nickel Institutepreferred for severe acid service and for resistance to chloride pitting and stress corrosion cracking. They are often selected for flue gas * taken from ASTM specifications for plate, sheet, and strip when available or from company data sheets 25-6MO N08926 A-4 0.02 0.15-0.25 19.0-21.0 24.0-26.0 6.0-7.0 0.50-1.50 41

High-Performance Alloys for Resistance to Aqueous

INCOLOY®alloy 25-6MO A 6% molybdenum, nitrogen-bearing super-austenitic stainless steel resistant to pitting and crevice corrosion in media containing chlo- rides and other halides. High-Performance Alloys for Resistance to Aqueous Sulfuric Acid 12 Hydrochloric Acid 17 Hydrofluoric Acid 20 Phosphoric Acid 22 chromium carbide precipitation resulting from heat treatments,improves resistance to pitting and crevice INCOLOY alloys 825 & 020 INCOLOY alloy 25-6MO INCONEL alloys G-3 & 050 INCOLOY alloy 925 INCONEL alloy 725 INCONEL alloys C-276 & 622

High-Performance Alloys for Resistance to Aqueous

Sulfuric Acid 12 Hydrochloric Acid 17 Hydrofluoric Acid 20 Phosphoric Acid 22 chromium carbide precipitation resulting from heat treatments,improves resistance to pitting and crevice INCOLOY alloys 825 & 020 INCOLOY alloy 25-6MO INCONEL alloys G-3 & 050 INCOLOY alloy 925 INCONEL alloy 725 INCONEL alloys C-276 & 622 INCOLOY alloy 25-6HN - PCC Forged ProductsINCOLOY 25-6MO INCONEL 686 CPT 55 INCOLOY 25-6MO INCONEL 625 FM 50 Allegheny AL6XN INCONEL 686 CPT 55 Allegheny AL6XN INCONEL 625 FM 55 INCOLOY 25-6HN INCONEL 686 CPT 60 INCOLOY 25-6HN INCONEL 625 FM 55 INCOLOY 27-7MO INCONEL 686 CPT 80 Base Metal Filler Metal Environment 25-6MO 25-6HN AL6XN 27-7MO 5% HCl 45 55 64 <0.1 10% H2SO4+ 2% HCl 29

INCONEL® alloy 686 The Corrosion-Resistant Alloy for

range of corrosion-resistant alloys reported in the table. Table 3.Resistance to Localized Corrosion Alloy UNS No. PRENa CCT (°C)b INCOLOY alloy 25-6MO N08926 35.8 <50 INCONEL alloy 625 N06625 40.8 65 INCONEL alloy C-276 N10276 45.3 90 INCONEL alloy 22 N06022 47.8 125 Hastelloy C-2000 N06200 46.0 125 VDM alloy 59 N06059 47.0 135 Incoloy 25-6MO Fasteners with World Wide ShippingINCOLOY® alloy 25-6MO (also known under UNS N08926/W. Nr. 1.4529, formerly UNS N08925) is a super-austenitic stainless steel consisting of 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium make-up of this alloy make it resistant to a wide range of corrosive conditions.

Incoloy 926 - HB SPECIAL ALLOY MFG

Incoloy 926 (UNS N08926) Incoloy 926 (UNS N08926) is an austenitic stainless steel alloy has a similar chemical composition with 904L alloy, its nitrogen content is 0.2%, molybdenum content is 6.5%. Molybdenum and nitrogen content significantly increased the resistance of pitting and crevice corrosion in the halide media.Meantime, nickel and nitrogen not only ensures the stability of Incoloy 926 1.4529 UNS N08926 Nickel Alloy Seamless Incoloy 926 Alloy Characteristic 1.It has high resistance to pitting and crevice corrosion when in Halide and H2S contained acid media. 2.In practice, effective in resistance of chloride stress corrosion cracking. 3.A variety of corrosion have good corrosion resistance capability in the normal oxidation and restore environment. 4.Upgrade mechanical properties than Cronifer 1925 LC-Alloy 904 L.

Incoloy 926 DIN 1.4529 UNS N08926 Incoloy Round /

Incoloy 926 DIN 1.4529 UNS N08926 Incoloy Round Bars Plates Square Bars ASTM EN 1.It has high resistance to pitting and crevice corrosion when in Halide and H2S contained acid media. nickel alloy. 926 has particular corrosion resistance in the chloride ions medium due to the excellent local corrosion resistance and 25% nickel alloy Incoloy 926 Super Austenitic Stainless Steel/Nickel Alloy Incoloy 926 (N08926) nickel alloy is a high corrosion resistant super austenitic stainless steel containing high Cr and high Mo. It maintains good corrosion resistance in harsh environments such as high temperature, sea water or flue gas desulfurization equipment. In some cases, it is even comparable to Hastelloy and titanium.

Incoloy 926 alloy (UNS N08926, W.Nr.1.4529) plate,strip

Incoloy 926 alloy (UNS N08926, W.Nr.1.4529) plate,strip,wire rods,bar,wire The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, and nitrogen improves yield and tensile strengths. Incoloy Alloy 25-6MO,Incoloy Alloy 25-6MO Forging Incoloy Alloy 25-6MO is a super-austenitic molybdenum stainless steel that exhibits excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, and nitrogen improves yield and tensile strengths

Inconel 25-6MO Elgin Fasteners

INCOLOY® alloy 25-6MO (UNS N08926/W. Nr. 1.4529, formerly UNS N08925) is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments. The alloy is especially resistant to non-oxidizing acids such Inconel-25-6MO ScrewsInconel-25-6MO Screws. IN STOCK. Lightning Bolt is capable of manufacturing a wide range of Inconel-25-6MO fasteners. INCOLOY alloy 25-6MO fasteners (also known under UNS N08926/W. Nr. 1.4529, formerly UNS N08925) are made of a super-austenitic stainless steel consisting of 6% molybdenum and enhanced by an addition of nitrogen.

N08926/25-6MO/1.4529

Some of the designations used to denote INCOLOY alloy 25-6MO are listed below:-UNS N08926; Fabrication Machinability. Machining characteristics of this INCOLOY alloy 25-6MO is similar to that of other austenitic alloys. Machining of INCOLOY alloy 25-6MO should be done at a slightly lower speed when compared stainless steel using rigid tooling Nickel & Nickel Alloys/Corrosion & High Temp Resistant INCONEL® Filler Metal 625 is used for gas-metal-arc and gas-tungsten-arc welding of INCONEL® 625, INCOLOY® 825, INCOLOY® 25-6MO, and a range of high alloy austenitic and super austenitic stainless steels. It is also used for surfacing of steel, for welding 9% Ni steels, and for welding various corrosion-resistant alloys such as alloy 20.

Nickel Alloy 926 Steel Round Bars

Incoloy 926 (N08926) nickel alloy is a high corrosion resistant super austenitic stainless steel containing high Cr and high Mo. It maintains good corrosion resistance in harsh environments such as high temperature, sea water or flue gas desulfurization equipment. In some cases, it is even comparable to Hastelloy and titanium. Overmatching Superalloy Consumable Inco-weld Welds in 25-6 Mo plate (UNS N08926) were completed using 622 and 625 filler metals whilst welds in 27-7 Mo plate (UNS S31277) were completed using 686CPT filler metal. A macro section from one of these single sided welds is shown in Figure 2 and the compositions of the filler metals are listed in Table 4.

Preferred supplier of INCOLOY 25-6MO TubeAlloy 25-6MO

INCOLOY 25-6MO Electric resistance welded (ERW) INCOLOY 25-6MO Electric resistance welded (ERW) FOB PRICE:$ 24000 ~ $ 25500 USD / Ton:INCOLOY 25-6MO Electric resistance welded (ERW) Size:6.35 mm OD To 152 mm OD:In Length of :Standard & Cut length:INCOLOY 25-6MO Electric resistance welded (ERW) Marking:BRAND-SIZE-SPECIFICATION-GRADE-HEAT Special Metals INCOLOY® 25-6MO Super Austenitic Special Metals INCOLOY® 25-6MO Super Austenitic Stainless Steel (UNS N08926) Categories:Metal; Ferrous Metal; Stainless Steel. Material Notes:A super-austenitic containing 6% molybedenum and offering excellent corrosion-resistance to neutral and acidic environments containing chlorides or other halides, such as what is found in air pollution control and flue gas desulfurization systems.

Special Metals INCOLOY® 25-6MO Super Austenitic

Super Austenitic Stainless Steel (UNS N08926), A super-austenitic containing 6% molybedenum and offering excellent corrosion-resistance to neutral and acidic environments containing chlorides or other halides, such as what is found in air pollution Specification Sheet:Alloy 825 (UNS N08825) W.Nr. 2Resistance to Laboratory Sulfuric Acid Solutions * Average of three tests. 10% 40% 50% Resistance to Chloride Pitting and Crevice Corrosion Alloy Temp. of Onset of Crevice Corrosion Attack* °F (°C) 316 27 (-2.5) 825 32 (0.0) SSC-6MO 113 (45.0) 625 113 (45.0)

Super Alloy INCOLOY Alloy 25-6MO (UNS N08926)

Jul 04, 2013 · Some of the designations used to denote INCOLOY alloy 25-6MO are listed below:-UNS N08926; Fabrication Machinability. Machining characteristics of this INCOLOY alloy 25-6MO is similar to that of other austenitic alloys. Machining of INCOLOY alloy 25-6MO should be done at a slightly lower speed when compared stainless steel using rigid tooling and optimum lubrication and cooling. Welding UNS N08926 Incoloy 926 Plate, View Incoloy 926 Plate, CH UNS N08926 Incoloy 926 Plate FOB Reference Price nickel alloy. 926 has particular corrosion resistance in the chloride ions medium due to the excellent local corrosion resistance and 25% nickel alloy content.A variety of experiments in the 10000-70000ppm of Chloride concentration, the heat exchanger, filter, mixer, etc. in the phosphate

UNS N08926,25-6Mo,1.4529,6Mo Super Austenitic Stainless

UNS N08926,25-6Mo,1.4529,6Mo Super Austenitic Stainless Steel UNS N08926/1.4529 is a high corrosion resistant stainless steel with high contents of chromium and molybdenum, and provides excellent corrosion resistance under severe environments such as high temperature seawater and flue gas desulfurization plants. UNS N08926/25-6MO, Product details - Hite Special AlloyShanghai Hite Special Alloy Co., Ltd is specialized at supplying UNS N08926/25-6MO, nickel alloy, Co-based alloy and stainless steel material.

UNS N08926/25-6MO, Product details - Hite Special Alloy

Shanghai Hite Special Alloy Co., Ltd is specialized at supplying UNS N08926/25-6MO, nickel alloy, Co-based alloy and stainless steel material. specialmetalsINCOLOY® alloy 25-6MO (UNS N08926/W. Nr. 1.4529, formerly UNS N08925) is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments.

Incoloy 25-6Mo alloy (UNS N08926, W.Nr.1.4529 formerly

INCOLOY 25-6Mo alloyUNS N08926/W.Nr.1.4529 formerly UNS N08925) is a super-austenitic stainless steel containing 6% molybdenum and enhanced by an addition of nitrogen. The nickel and chromium contents of this alloy make it resistant to a wide range of corrosive environments.

Post your comment